Tree Service Fairfield

Frequently Asked Questions About Tree Services

What is the best way to protect trees during construction?

Protecting trees during construction projects is crucial for preserving their health and preventing damage. Here are some key steps to take:

• Tree Protection Zone (TPZ): Establish a designated area around the trees that is off-limits to construction activities. The size of the TPZ depends on the tree's size and species, but generally, it should extend to the drip line (the outermost edge of the tree's canopy).
• Root Protection: Avoid digging, trenching, or compacting the soil within the TPZ. If excavation is necessary, use hand digging or air spading to minimize root disturbance.
• Trunk Protection: Protect tree trunks from damage by wrapping them with protective barriers, such as burlap or plywood.
• Branch Protection: Avoid cutting or damaging branches unless absolutely necessary. If pruning is required, have it done by a certified arborist.
• Watering: Ensure trees receive adequate water during construction, especially if the soil has been disturbed or compacted.
• Monitoring: Regularly monitor trees for signs of stress or damage during and after construction.

Consulting with a certified arborist during the planning stages of a construction project can help ensure the protection of valuable trees on the site. They can provide expert advice on establishing TPZs, minimizing root disturbance, and mitigating potential impacts on tree health.

How do I know if a tree is dying?

A dying tree can exhibit several signs, but it's essential to remember that some signs may also indicate stress or other problems that are treatable. Here are some common indicators of a dying tree:

• Extensive dieback: Large portions of the tree's crown are dead, with no signs of new growth.
• Severe bark damage: Large sections of bark are missing or severely damaged, exposing the inner wood.
• Root decay: Mushrooms or conks growing at the base of the tree, indicating fungal decay in the root system.
• Leaning precariously: The tree is leaning significantly and showing signs of instability.
• No leaves or buds: During the growing season, the tree is completely bare of leaves and shows no signs of new buds forming.
• Woodpecker holes: While a few woodpecker holes are not necessarily a cause for concern, numerous holes can indicate insect infestation or decay within the tree.

It's essential to consult with a certified arborist to confirm whether a tree is dying or can be saved. They can assess the tree's condition, identify the cause of the decline, and recommend the best course of action.

How close to a house can you plant a tree?

The recommended distance for planting a tree from a house depends on the tree's mature size and root system. As a general rule, plant trees at least:

• 10 feet away from foundations for small trees (mature height under 30 feet).
• 20 feet away from foundations for medium-sized trees (mature height 30-70 feet).
• 30 feet or more away from foundations for large trees (mature height over 70 feet).

Planting too close can lead to root damage to foundations, sidewalks, or underground utilities. It's always a good idea to research the mature size and root system of the specific tree species you're considering and consult with a certified arborist for guidance on proper placement.

Is it cheaper to cut down a tree yourself?

While it might seem tempting to cut down a tree yourself to save money, it's important to weigh the potential risks and costs involved.
Risks:

• Safety: Felling a tree is extremely dangerous without proper training and equipment. Falling branches or the entire tree can cause serious injury or even death.
• Property Damage: If the tree falls in the wrong direction, it could damage your home, vehicles, or other structures on your property.
• Liability: If you cause damage to your neighbor's property or injure someone while cutting down a tree yourself, you could be held liable.

Costs:

• Equipment: You'll need to invest in or rent specialized equipment like chainsaws, safety gear, ropes, and potentially a wood chipper.
• Disposal: You'll be responsible for disposing of the tree debris, which can be time-consuming and expensive, especially for large trees.
• Repairs: If the tree falls incorrectly and causes damage, you'll have to cover the cost of repairs.

In most cases, the risks and potential costs outweigh any perceived savings from DIY tree removal. Hiring a professional tree service company is the safest and often the most cost-effective option in the long run. They have the experience, equipment, and insurance to handle the job properly and protect you from liability.