Tree Service Orosi

Frequently Asked Questions About Tree Services

Is it OK to cut tree roots?

Cutting tree roots can be necessary in some situations, but it should always be done with caution and preferably under the guidance of a certified arborist.
**When it's OK to cut roots:**

• Small roots: Cutting small, superficial roots during landscaping or gardening is usually not a significant problem for the tree.
• Encroaching roots: Roots growing into sidewalks, driveways, or foundations may need to be cut back. However, it's essential to do this carefully to avoid damaging the tree's structural integrity.
• Root pruning for transplanting: Before transplanting a tree, root pruning is done to encourage new root growth within a smaller area, making the transplanting process more successful.

**Risks of cutting tree roots:**

• Tree instability: Cutting large structural roots can weaken the tree's support system, making it more susceptible to windthrow or breakage.
• Disease entry: Cuts create wounds that can serve as entry points for disease-causing organisms.
• Reduced nutrient and water uptake: Cutting roots can limit the tree's ability to absorb water and nutrients from the soil.

Before cutting any significant tree roots, consult with a certified arborist to assess the situation, determine the best course of action, and minimize the risk of damage to the tree.

What is the best way to protect trees during construction?

Protecting trees during construction projects is crucial for preserving their health and preventing damage. Here are some key steps to take:

• Tree Protection Zone (TPZ): Establish a designated area around the trees that is off-limits to construction activities. The size of the TPZ depends on the tree's size and species, but generally, it should extend to the drip line (the outermost edge of the tree's canopy).
• Root Protection: Avoid digging, trenching, or compacting the soil within the TPZ. If excavation is necessary, use hand digging or air spading to minimize root disturbance.
• Trunk Protection: Protect tree trunks from damage by wrapping them with protective barriers, such as burlap or plywood.
• Branch Protection: Avoid cutting or damaging branches unless absolutely necessary. If pruning is required, have it done by a certified arborist.
• Watering: Ensure trees receive adequate water during construction, especially if the soil has been disturbed or compacted.
• Monitoring: Regularly monitor trees for signs of stress or damage during and after construction.

Consulting with a certified arborist during the planning stages of a construction project can help ensure the protection of valuable trees on the site. They can provide expert advice on establishing TPZs, minimizing root disturbance, and mitigating potential impacts on tree health.

Do I need a permit to remove a tree in USA?

Whether or not you need a permit to remove a tree in USA depends on local regulations. In some areas, permits are required for removing trees of a certain size or those located within protected areas.
It's essential to check with your local council or municipality for specific tree removal regulations. Reputable tree service companies are typically familiar with local regulations and can help you determine if a permit is needed.

How do I know if a tree is dying?

A dying tree can exhibit several signs, but it's essential to remember that some signs may also indicate stress or other problems that are treatable. Here are some common indicators of a dying tree:

• Extensive dieback: Large portions of the tree's crown are dead, with no signs of new growth.
• Severe bark damage: Large sections of bark are missing or severely damaged, exposing the inner wood.
• Root decay: Mushrooms or conks growing at the base of the tree, indicating fungal decay in the root system.
• Leaning precariously: The tree is leaning significantly and showing signs of instability.
• No leaves or buds: During the growing season, the tree is completely bare of leaves and shows no signs of new buds forming.
• Woodpecker holes: While a few woodpecker holes are not necessarily a cause for concern, numerous holes can indicate insect infestation or decay within the tree.

It's essential to consult with a certified arborist to confirm whether a tree is dying or can be saved. They can assess the tree's condition, identify the cause of the decline, and recommend the best course of action.